VooPoo Vinci X Mod Pod

The VooPoo Vinci X advances the dual airflow system design of the Vinci Mod Pod series with a removable battery* that delivers increased versatility with more power and endurance, making it the perfect device for enjoying both freebase and nicotine salt e-liquids, regardless of your experience level.

The Vinci X is slightly taller and deeper than the original VooPoo Vinci, but otherwise adopts the same ergonomic rectangular design, with a rugged and lightweight zinc alloy frame accentuated by vibrant side panels. A thickly threaded bottom battery door is easy to grab and firmly holds the 18650 cell* in place, and a micro USB port supports charging the cell; however, an external charger is recommended to extend battery life, and enable unlimited device use with replacements. The Vinci X also uses the same triple button interface, detailed 0.96” colour screen, and GENE.AI chipset which delivers variable wattage power up to 70W (0.1 - 3.0Ω) and offers a range of advanced features, including a 14-day puff tracker and automatic adjustment to the coil. Note: the Vinci X does not include draw activation.

The Vinci pod has a capacity for 5.5mL of e-liquid with clear visibility of the amount remaining. A side fill port makes refilling the pod a breeze, while magnets in each corner firmly attach it to the base. The pod is compatible with the wide-ranging PnP series of coils for DL (direct to lung), half-DL (restrictive direct to lung), and MTL (mouth to lung) vaping, and the draw restriction determined by the direction it faces: installing the pod with the fill plug in front leaves all three airflow channels on each side unplugged for an open direct to lung draw; and turning the pod with the fill port facing the back plugs 2.5 of each of the channels on both sides, leaving only half one exposed for a tight MTL draw.

The original kit includes a 0.3Ω PnP-VM1 mesh coil rated for 32 - 40W (DL), and a 0.6Ω PnP-VM4 mesh coil rated for 20 - 28W (half-DL).

Updated Vinci packaging includes 3 extra PnP coils, for a total of 5! They are:

• PnP-VM1 0.3Ω mesh: 32 - 40W (DL)
• PnP-VM3 0.45Ω mesh: 25 - 35W (half-DL)
• PnP-VM4 0.6Ω mesh: 20 - 28W (half-DL)
• PnP-R1 0.8Ω ceramic: 12 - 18W (MTL)
• PnP-R2 1.0Ω standard: 10 - 15W (MTL)

Replacement PnP series coils are available here.

*Note: 18650 cell(s) sold separately

Vinci X Mod Features:

• Dimensions: 117 x 29.5 x 25.3mm

• Battery Type: Single 18650 Cell (not incl)

• Threaded bottom battery door

• Output Power: 5 - 70W

• Output Voltage: 3.2 - 4.2V

• Resistance Range: 0.1 - 3.0Ω

• GENE.AI Chipset

• Max power protection: auto-sense coil & adjust/limit max wattage

• Overtime protection

• Short-circuit protection

• Overcharge protection

• Output protection

• Over-discharge protection

• Over temp protection

• Battery reverse protection

• Zinc Alloy Frame

• Vibrant Side Panels

• 0.96” Color Screen

• Triple Button Interface

Vinci Pod Features:

• E-Liquid Capacity: 5.5mL

• Built-In Mouthpiece

• Dual Airflow System

• Turn pod 180° to switch: MTL / DTL

• PnP Coil Series Compatible

• Side Fill Port

• 4 Corner Magnets

Includes:

• Vinci X Device

• Vinci Pod

• PnP-VM1 0.3Ω coil (32 - 40W)

• PnP-VM4 0.6Ω coil (20 - 28W)

• Micro USB Cable

• User Manual

• Warranty Card