Description
OXVA Xlim Go 2 — Refillable Open Pod System
The OXVA Xlim Go 2 is an open pod system built around a 1500mAh high-density battery and the top-fill XLIM V3 pod platform. Designed for adult vapers who fill their own pods with bottled e-liquid, it supports both freebase and nicotine salt formulations and is fully compatible with the entire OXVA Xlim series pod range.
1500mAh Battery with 2A Fast Charging
The integrated 1500mAh battery delivers extended use between charges. With 2A fast charging over USB Type-C, the device reaches approximately 80% capacity in about 30 minutes. A three-colour LED indicator displays remaining battery life at a glance.
Automatic 5–30W Output
The Xlim Go 2 outputs between 5W and 30W, automatically adjusting power based on the resistance of the installed pod. There are no settings to configure — the device detects the pod and applies the appropriate output.
Top-Fill XLIM V3 Pods (2mL, CRC Compliant)
The kit uses top-fill XLIM V3 pods with a 2mL capacity and child-resistant closure (CRC) compliance. The device also accepts all OXVA Xlim series pods in 0.4Ω, 0.6Ω, 0.8Ω, and 1.2Ω resistances, allowing users to pair lower-resistance pods with freebase e-liquid or higher-resistance pods with nicotine salts.
Adjustable Airflow & Draw Activation
A side-mounted ergonomic airflow slider lets users fine-tune the draw from restricted to open. The device is draw-activated — there is no fire button; inhaling on the mouthpiece triggers output. An integrated LED panel lighting effect activates during use.
Lightweight Construction
At approximately 46g, the Xlim Go 2 is built from PCTG with IML (in-mould labelling) panel construction for a durable, lightweight body.
Specifications
| Battery Capacity | 1500mAh (rechargeable, high-density) |
|---|---|
| Charging | USB Type-C, 2A fast charge (~80% in 30 min) |
| Output Range | 5W–30W (automatic, pod-detected) |
| Pod Capacity | 2mL, top-fill (CRC compliant) |
| Pod Compatibility | All OXVA Xlim series pods (0.4Ω / 0.6Ω / 0.8Ω / 1.2Ω) |
| Activation | Auto-draw |
| Airflow | Side adjustable slider |
| Indicator | Three-colour LED (battery status) |
| Weight | ~46g |
| Materials | PCTG + IML |
How to Use
- Fill the pod: Remove the pod from the device, lift the rubber plug on the top of the pod, insert your e-liquid bottle nozzle, and fill the 2mL chamber. Press the plug firmly back into place.
- Prime a new pod: When filling a brand-new pod for the first time, let it sit for at least 5 minutes so the cotton fully saturates. This prevents dry hits and premature coil burnout.
- Use: Insert the pod and inhale on the mouthpiece — the device is draw-activated with no buttons.
- Replace the pod: When vapour production drops noticeably or a burnt taste develops, replace the pod. Coils are integrated; the full pod is replaced.
What's in the Box
- 1 x OXVA Xlim Go 2 Device
- 1 x XLIM V3 Pod (2mL)
- 1 x USB Type-C Charging Cable
- 1 x User Manual
WARNING: Nicotine is highly addictive. This product is intended for adult use only and is sold exclusively to customers of legal age in their province or territory. Age verification is required at checkout. E-liquid sold separately; maximum nicotine concentration of 20mg/mL in accordance with Canadian regulations. Keep out of reach of children and pets.
