Joyetech present The EVic-VTC Mini, the little brother of the EVic-VT, a compact, sub-ohm, 60W, temperature control box mod with replaceable battery!
Following the succes of the EVic-VT, Joyetech introduces to its line of best selling products the new EVic-VTC Mini. With all the functionalities of its big brother, and some more, the VTC Mini uses one replaceable 18650 battery (not included) making it a more durable device, as you can simply replace the cell when it starts not holding its charges as long as it used to, and can have a spare battery or two when you're on the go.
The new design is a lot more compact, comparable to the size of the Kanger Subox Mini or Eleaf TC 40W, and has a very nice matte finish that feels great in your hand.
The temperature control functionalities, called VT-Ni (with Nickel Ni-200 coils) and VT-Ti (with Titanium coils) mode, are simpler than ever to use, just press the power button 3 times, the current mode will blink, and you will be able to switch between VT-Ni, VT-Ni, VW, and Bypass mode by pressing the bottom right button. Pressing the bottom left button, you can access the resistance setting that will automatically detect the new atomizer resistance. Another press of that button will allow you to switch the battery indicator to a puff counter or a timer.
VW (variable wattage) mode allows you to vape between 1-60W with standard kanthal coils of a resistance ranging between 0.1-3.5ohms. Using this same type of coils, you can also use Bypass mode, which makes the VTC act like a mechanical mod, powering your atomizer according to your current battery voltage.
VT-Ni and VT-Ti modes allow you to vary temperature between 100-315℃ / 200-600°F, with nickel or titanium coils of a resistance ranging between 0.05ohm to 1ohm.
The VTC Mini uses one replaceable 18650 high drain battery (minimum 20A recommended) not included, protected behind a convenient magnetic battery door, and that can be charged using the passthrough USB port and inclued charging cable.
You can get high drain 18650 batteries from our mod batteries section.
- Variable Wattage 1-60W
- VW/Bypass Resistance Range: 0.1Ω-3.5Ω
- Bypass Mode (the device will act like a mechanical mod)
- Temperature Control (Ti / Ni200)
- Temperature Range: 100-315° C / 200-600 °F
- Temperature Mode Resistance Range: 0.05-1.0Ω
- Upgradable Firmware, always stay up to date with the latest technology
- Uses 1x 18650 high drain battery, NOT INCLUDED
- 510 Spring Connector
- OLED Display Screen
- Size: 22.20 x 38.20 x 82.00mm
- Includes: 1 x eVic VTC Mini Body; 1 x eGo ONE Mega Clearomizer; 1 x Manual & Warranty Card; 1 x Micro USB Cable ; 1 x Ni 0.2Ω Coil Head; 1 x Ti 0.4Ω Coil Head