Sorry, Smok X Cube II 160W Temp Control Box Mod has been discontinued.
Presenting the Smok X Cube II, a 160W Temperature Control Box Mod customizable through an external app!
The Smoke X Cube II is a huge upgrade upon the X-Pro and the original X Cube. It now offers an incredible maxium wattage output of 160W, sure to satisfy the most demanding vapers. It's temperature control mode works as low as 0.08ohm with Nickel (Ni200) coils and can be regulated between 200°F-600°F / 100°C-315°C.
With a solid zinc and stainless steel build the X Cube II has a sleek design, and features a large en convenient power button, occupying the whole front side of the box mod. When not pressed, a series of LED can be seen next to the button, and their colour is customizable thanks to the external app offered by Smok, and accessible via bluetooth on Android 4.3+ and iOS 7.0+ devices. The app also allows you to fully control the device from your mobile device or tablet, with the possiblity of saving up to 16 different temperature control profiles. In addition the Smok X Cube II firmware is upgradeable, to always stay up to date with the latest technology.
It uses two 18650 batteries, sold separately, protected by a convenient magnetic battery cover. You can get 18650 batteries here.
Warning: When using two 18650 batteries in a device such as this one, always make sure to use the same brand and model of batteries, and that your batteries are both fully charged before inserting them in the device. Mismatched batteries can result in malfunction and damage to your device.
Please watch the video clip in the "Video" tab of this product page for more information on how to use the Smok X Cube II.
CLICK HERE to get to the Smok Firmware upgrade page and guide.
- Output Wattage: 6W-160W
- Output Voltage: 0.35V-8V
- Standby Current: <300uA (When Batteries Are Full)
- Resistance Range: 0.08Ω-3.0Ω
- Temperature Range: 200°F-600°F / 100°C-315°C
- Material: Zinc Alloy and Stainless Steel Construction
- Customizable LED Light
- 16 Wattage Memory Modes
- Magnet Battery Cover
- Requires Two High Drain 18650 batteries (Sold Separately)
- Blutooth Capability (Compatible with Android 4.3+ and iOS 7.0+ Operating Systems)
- Large OLED Screen
- Spring Loaded 510 Connector
- Dimensions: 100mm x 60mm x 24.5mm
- 1 x Smok X Cube II
- 1 x Micro USB Cable
- 1 x Carrying Pouch
- 1 x User Manual
- 1 x Warranty Card
Customer Reviews 3 item(s)
Review by Jacky(Posted on 2016-01-14)
I upgraded to this from a kangertech subox and I gotta to say I love it. I put this with a velocity rda and I've be chucking clouds. The good thing I have to say about the xcube is that it has Bluetooth which you can connect it to your phone. This helps out a lot because it's a hassle changing your setting with just 3 buttons on the xcube. Moreover, the firing button lights up; this is one on the main selling point for me. I know, I'm such a kid. :D
However, one of the con I have to say about this product is that the chip does not read the ohms properly. For example, when I built my rad it should read at a 0.25, but on the xcube it reads at 1.0 sometimes. Easy fix to this is to take the tank out and clean the pins with q-tips and it should read fine again. Kinda annoying but it's something I can look over.
Tl;Dr: ITS LIGHTS UP!!! GET IT!
Review by Dan(Posted on 2016-01-12)
I love the fact that I can customize the lights on this bad boy. It's like a party when I vape. The firmware is upgradable too, which is an added plus.
Review by Tyler(Posted on 2015-11-27)
I only have one thing to say about this mod amazing. I have it paired with the new smok tfv4 tank and it's incredible as well 180 smoke has the best price as well two thumbs up and highly recommend!!!!